Behringer ULTRADRIVE PRO DCX2496 - Stereo Bi-Amp with Mono Subwoofer

DCX.Server 2/DCX.Client 2
www.stute-engineering.de
Chapter
: Software screens
19
3.2.6.3 Tab „Network“
1
DCX.Server IP: IP address of the
computer where DCX.Server is running.
Tip: Find the DCX.Server see “star 3”
2
Port value. Must be identical with the
value from the DCX.Server (default
40000)
3
Find DCX.Server: Button executes a
network request to find the IP address
of the DCX.Server
4
Display the DCX.Server software
version.
5
Shutdown: Remote shutdown of the
computer where the DCX.Server is
executed!
Note: Not supported under Linux
operating system.
Attention: A shutdown command quit
the DCX.Server PC system. Not saved
data from other applications, which
are running on the same PC, will be
lost!