Behringer ULTRADRIVE PRO DCX2496 - Application Examples; Stereo Tri-Amp Operation

DCX.Server 2/DCX.Client 2
www.stute-engineering.de
Chapter
: Software screens
18
3.2.6.2 Tab „DCX2496“
1
Out Config On: Enable or disable the
Output Configuration setting, see also
star 2.
Note: For more details read the
DCX2496 manual.
2
Out Config: Set a DCX2496 output
configuration
(e.g. Group LMH LMH = Out 1=Low,
Out 2=Mid, Out 3=High, similar for Out
4 to 6. For this configuration channel
1&4, 2&5, 3&6 are linked. Changes at
one channel are automatically
transferred to the linked channel).
Note: Details see DCX2496 manual.
3
In Stereo: Adjust the DCX2496 input
stereo link (e.g. A+B, changes at Input
A are automatically transferred to Input
B)
4
In Sum: Set source signals for SUM
signal (e.g. A+B, Sum = Input A + B)
5
Source Output: Set source for each
output channel (e.g. In A or Sum)
6
Transmit to DCX: Transmit the setup to
DCX2496 device
Note: Check the Behringer DCX2496 manual for more details.