o X-Over incl. X-Over link, Phase, Polarity, Limiter
• DCX2496 Setup
o Adjustment “Out configuration” (MONO, LMH LMH,..)
o Adjustment “In Stereo Link” (A+B…)
o Adjustment Sum signal setup (A+B, A, B, C, …)
o Adjustment Output source for Out 1..6 (A,B,C, Sum)
Note: “Delay Link” is not supported and should be switched off.
1.3.4 Can I use the DCX.Client on multiple devices (e.g. computer and tablet)?
Yes. But you should avoid parallel controlling from two or more clients.
1.3.5 Does DCX.Server run on a Wi-Fi connected computer?
No, the DCX.Server software has to be executed on a computer with a wired LAN
connection. A connection via powerline network adapter or network switch is sufficient. The
DCX.Client can be executed on an extra Wi-Fi or LAN wired computer, mobile phone or
tablet computer.
1.3.6 Is it allowed to install the DCX.Server and DCX.Client at the same PC?
Yes, you can install the MS-Windows version of the client at the same PC.
To Next Page
Loading...
