Behringer ULTRADRIVE PRO DCX2496 - Quick Start Guide; Output Configuration Selection; Setting Crossover Frequencies; Muting Input and Output Channels

DCX.Server 2/DCX.Client 2
www.stute-engineering.de
Chapter
: Quick Start
6
2 Quick Start
2.1 Program screens
DCX.Server 2 DCX.Client 2
Note: Some details of the screens for iOS, Android, macOS and MS-Windows can be different.
2.2 DCX.Server 2 (Trial / Full version)
Without a valid license the DCX.Server software runs as a trial version. In combination with the
free DCX.Client version, your DCX2496 device and a USB-RS232 interface you can easily
check the proper work of the system before you buy it. After the successful test, the trial can
be upgraded to the full version via the ordering of the license in our web shop, without any
re-installation.
Trial limits: Control the gain & mute of the inputs A, B and C.
2.2.1 Download DCX.Server
Use the software “GetSoftware” to download your software version. You find the software in
the download area from our homepage.
• Select a file
• Press “Download”
• Choose a target folder for the download
• The download begins
• Execute the file to start the setup
PC Firewall: Permit the network access for the download!
2.2.2 Operating system blocks the execution
If your operating system blocks the execution of “GetSoftware” after the download, press in
the viewed SmartScreen warning at first “more info” and finally “Run anyway”.