Beko DRYPOINT M intelligence - Function Testing and Visual Inspection; Changing Filter Element

Installation and operation instructions US-EN
28 DRYPOINT
®
M intelligence
7.1.2. Changing lter element
The lter elements must be changed at least every 12 months. To change the lter element:
1. Close the shut-o valves (1) and open the shut-o valve (2) of the bypass.
2. Hold the top part of the housing, unscrew the housing extension (3) and remove it (4).
3. Remove the spent lter element (5) and dispose of it safely.
4. Insert the new lter element (6).
5. Mount (7) and screw on (8) the housing extension.
6. Open the shut-o valves (9) and close the shut-o valve (10) of the bypass.
7. Apply the new nanolter service label (11).
1
2
1
4
5
3
7
8
6
9
10
9
11
CAUTION
Risk of damage to the environment!
Spent lter elements might contain substances that are harmful to the environment.
Therefore dispose of spent lter elements according to the applicable statutory regulations.
For more information, see chapter 6. "Dismantling and disposal", page 32.