US-EN Installation and operation instructions
DRYPOINT
®
M intelligence 31
7.1.6. Cleaning
To clean the DRYPOINT
®
M intelligence, use a damp (but not wet) cotton cloth or disposable tissue and a mild conventional
detergent.
Spray a little detergent onto the clean cotton cloth or tissue and carefully wipe the component. Then dry the device with a
clean cloth or let it dry at room temperature. Observe all hygiene instructions applicable on the site.
NOTICE Damage caused by improper cleaning
Cleaning with a wet cloth, pointed implement or aggressive detergent can cause damage to the
device components and integrated electronic components.
• Never clean the device with a wet cloth.
• Do not use aggressive detergents.
• Do not clean or operate the device with hard or pointed implements.
8. Spare parts and accessories
The following spare parts and accessories for the DRYPOINT
®
M intelligence are available from the manufacturer.
Type Spare part Picture Order number
MDi 12 + MDi 17
Filter element
4007268
MDi 25 - MDi 55
4010849
MDi 65 - MDi 130
4009150
MDi 12 + MDi 17
Float drain 4025537
MDi 25 - MDi 55
MDi 65 - MDi 130
MDi 12 + MDi 17
Control unit see name plate
MDi 25 - MDi 55
MDi 65 - MDi 130
MDi 12 + MDi 17
Check valve G1/2 on request
MDi 25 - MDi 55
Check valve G1/2 on request
MDi 65 - MDi 130
Check valve G1 on request
To Next Page
Loading...
