Beko DRYPOINT M intelligence - Declaration of Conformity; EU Conformity Declaration

US-EN Installation and operation instructions
DRYPOINT
®
M intelligence 37
12. Declaration of Conformity
EU_decl_DP-M _EPC_USA_en_06_2018.docx
BEKO TECHNOLOGIES GMBH
Im Taubental 7
41468 Neuss
GERMANY
Phone: +49 2131 988
-0
www.beko-technologies.com
EU Conformity declaration
We herewith declare that the products identified in the following are in accordance with the requirements of the
relevant directives and technical standards. This declaration only refers to products that are in a condition in which
they were delivered by us. Parts that were not attached by the manufacturer and/or subsequently performed
interventions are not included.
Product designation:
DRYPOINT
®
M eco control
Models:
MDi-12
MDi
-17
MDi
-25
MDi
-35
MDi
-45
MDi
-55
MDi
-65
MDi
-100
MDi
-130
Voltage variants:
95…240 VAC ±10% (50-60 Hz) / 100…125 VDC ±10%
Max. operating pressure:
10 bar (g)
Product description and function:
Compressed air adsorption agent with membrane dryer with
integrated filter/condensate drain and sensor controlled
pressure dew point control for the setting of stable degrees of
drying.
Low voltage directive 2014/35/EU
Applied harmonized standards:
EN 61010-1:2010
EMC directive 2014/30/EU
Applied harmonized standards:
EN 61326-1:2013
EN 55011:2009 + A1:2010 group 1, class B
ROHS II directive 2011/65/EU
Adherence to the regulation of the directive 2011/65/EU for the restriction of the use of certain hazardous materials
in electrical and electronic devices is provided.
The manufacturer has the sole responsibility for issuing this conformity declaration.
Signed for and on behalf of:
Neuss, 6/11/2018 BEKO TECHNOLOGIES GMBH
i.V. Christian Riedel
Manager Quality Management