Beko DRYPOINT M intelligence - Shutting Down; Device Shutdown Procedure; Dismantling and Disposal; Dismantling and Disposal Guidelines

Installation and operation instructions US-EN
36 DRYPOINT
®
M intelligence
10. Shutting down
To decommission the drying system, disconnect it from the power mains and close the shut-o valves.
When not connected to the power mains, the drying system runs in fail-safe mode, whereby the full purge air volume is
used.
11. Dismantling and disposal
Before dismantling the drying system, disconnect it from the power mains and perform the steps for assembly and
installation in reverse order.
Disassemble the DRYPOINT
®
M intelligence and dispose of the parts and media separately
according to the applicable statutory waste disposal regulations.
Spent lter element:
Waste classication: 150203
Adsorption and lter materials; cleaning wipes and protective clothing, unless classied under 150202
Used oat drain:
Do not dispose of as household waste! Dispose of safely and according to the statutory waste disposal regulations.