Belden HIRSCHMANN BRS32 - Installation; Checking the Package Contents; Installing and Grounding the Device; Installing the Device Onto the DIN Rail

Installation BRS20/22/30/32/40/42/50/52
Release 12 01/2022
47
2Installation
The devices have been developed for practical application in a harsh
industrial environment.
On delivery, the device is ready for operation.
Perform the following steps to install and configure the device:
 Checking the package contents
 Installing and grounding the device
 Connecting the ferrite (optional)
 Installing an SFP transceiver (optional)
 Connecting the terminal blocks
 Connecting data cables
 Filling out the inscription label
 Making basic settings
2.1 Checking the package contents
 Check whether the package includes all items named in the section
“Scope of delivery” on page 102.
 Check the individual parts for transport damage.
2.2 Installing and grounding the device
2.2.1 Installing the device onto the DIN rail
Prerequisite:
 Verify that the minimum clearance at the ventilation slots is maintained to
meet the climatic conditions during operation:
Minimum clearance at the ventilation slots: 5 cm (2 in).
Note: Decreasing the minimum clearance reduces the specified maximum
operating temperature.
See table 6 on page 48.