Bemer Therapy System Evo - Product-Specific Technical Data (Applicators)

4.6 Accessories
4.6.1 B.Box Evo Battery Stand
The B.Box Evo Battery Stand supplies the B.Box Evo with power and makes it independent of the
mains. The B.Box Evo Battery Stand is connected to the B.Box Evo in place of the regular stand.
Before use, remove the protective cover using a commercially available Phillips screwdriver, size PH
1. Remember to reattach the protective cover to the device if it will be used or transported without
the B.Box Evo Battery Stand.
The B.Box Evo Battery Stand is charged via the control unit and the current battery status is shown
on the display.
B.Box Evo Battery Stand
B.GripEvo Attachment Strap
Example applications
Example application
4.6.2 B.GripEvo Attachment Strap
The B.Grip Evo Attachment Strap is a double-layer textile strap for easy attachment of the B.Grip Evo
holding module to a specific body part. The strap is designed so that it can be attached with just
one hand and is flexible enough to adapt to different parts of the body. The strap can be clipped
into the B.Grip Evo before use.
4.6.3 B.Box EvoPower Supply
The B.Box Evo Power Supply is designed for connection to a domestic power supply.
It also serves as a charger for the optionally available B.Box Evo Battery Stand.
External medical power supply (2MOPP) for the B.Box Evo
B.BoxEvo Car Adapter
4.6.4 B.BoxEvo Car Adapter
The B.Box Evo Car Adapter is designed for connection to a 12 V DC power supply. It can also be
used as a charger for the optionally available B.Box Evo Battery Stand.
The B.Box Evo Power Supply is a special, medically approved power supply unit that may
only be used in conjunction with the B.Box Evo. Commercially available power adapters
must not be connected to the device.
The B.Box Evo Car Adapter is a special, medically approved power supply unit that may
only be used in conjunction with the B.Box Evo. Commercially available power adapters
must not be connected to the device.
FR EN
5150