Bemer Therapy System Evo - Equipment and Skin Reaction Safety Warnings; Burn;Fire Hazard from Overheated Equipment; Infection Risk on Injured Skin; Blinding Risk from Optical Radiation

Designation B.BodyEvo foot protection
Article number 450500
Dimensions L x W x D in cm 67.5 x 60.0 x 0.02
Weight in kg 0.23
Material composition PES
Location of type plate Product packaging
3.3 EMC conformity
The BEMER therapy system Evo is intended for operation in an electromagnetic environment in
which immunity to RF disturbances is uncontrolled.
Electromagnetic Emission
Emission
Measurements Conformity
Electromagnetic Environment –
Guidlines
RF_emissions in
accordance with CISPR 11
Group 1 The BEMER therapy system uses RF energy
only for its internal function. As a result,
its RF emission is very low and it is unlikely
to disturb any adjacent electronic devices.
RF_emissions in
accordance with CISPR 11
Class B
The BEMER therapy system is intended for
use in all institutions including residential
areas and those that are directly connected
to a public grid that also supplies buildings
used for residential purposes.
Harmonics in accordance
with IEC 61000-3-2
Class A
Voltage fluctuations/flicker
in accordance with IEC
61000-3-3
Compliant
Recommended protective distances between portable and mobile RF telecommunication
devices and the BEMER therapy system
Customers or users can help to avoid electromagnetic disturbances by complying with the minimum
distance between portable and mobile RF telecommunication devices (transmitters) and the BEMER
therapy system, depending on the output of the communication device as indicated in the table on
the next page.
For transmitters where the maximum rated output is not listed in the table above, the distance can
be determined by using the equation that belongs to the relevant column, in which P is the maximum
rated output of the transmitter in watts (W) according to information from the transmitter manufacturer.
Rated output of
transmitter [W]
Protective distance,
depending on transmission frequency [m]
150 kHz to 80
MHz outside
ISM bands
150 kHz to 80
MHz inside
ISM bands
80 MHz to
800 MHz
800 MHz to
2,5 GHz
d= √P=1.17√P
3.5
3
d= √P=1.2√P
12
10
d= √P=1.2√P
12
10
d= √P=2.3√P
23
10
0,01 0,12 0,12 0,12 0,23
0,1 0,37 0,38 0,38 0,73
1 1,17 1,2 1,2 2,3
10 3,69 3,79 3,79 7,27
100 11,67 12 12 23
FR EN
3332