Bender RCMA423-DM - Response Value and Hysteresis Settings

Operation and setup
30
RCMA423-DM_D00064_03_M_XXEN/06.2017
5.5.4 Response value setting for overcurrent:
- Response value I2 (overcurrent)
- Response value I1 (overcurrent)
- Hysteresis (Hys) of the response values I1, I2
Increasing the response value I2 (Example: overcurrent)
Increasing the response value I1 (prewarning overcurrent)
Setting the hysteresis of the response value
1x
2x