21
VME420_D00026_03_M_XXDE/04.2019
4. Installation and connection
General dimension diagram and drawing for screw fixing
Only qualified personnel are permitted to carry out the
work necessary to install, commission an
d run a device or system.
Risk of electrocution due to electric shock!
Touching live parts of the system carries the risk of:
An electric shock
Damage to the electrical installation
Destruction of the device
Before installing and connecting the device, make sure
that the installation has been de-energised. Observe the
rules for working on electrical installations.
90 mm
45
67,5
36 mm
31,1
47,5
70,5
2
2
To Next Page
Loading...
