Operation and setting
27
VME420_D00026_03_M_XXDE/04.2019
5.4 Display in standard mode
By default, the display indicates the voltage across the terminals U1/+ and U2/
-. In order to change the default display, confirm your choice with Enter.
Menu
Sub
Menu
Menu
item
Activa
tion
Adjustable parameter
Set
(device
control)
OFF
Parameter setting via
password
FAC -
Re-establish factory set-
tings
PrE - Manual preset
SYS - Function blocked
InF
-
Display hard / software
version
HiS
Clr -
History memory for the
first alarm value, erasa-
ble
In the standard mode, the currently measured voltage or
frequency can be displayed using the Up and Down keys.
To Next Page
Loading...
