BENDIX SmarTire User Manual

14
SMARTIRE SYSTEMS INC.
LOW-PRESSURE WARNING
Factory default 18 PSI = 1.25 Bar
This function changes the low-pressure warning
threshold for each axle.
Programming Steps
1. Enter Level 1 Programming Mode (see page 12)
2. To enter this function press the MODE
button until the flat tire icon and pressure
units are displayed.
3. Press the TIRE button to scroll to the
desired axle. The tires of the selected axle
are filled in.
4. Press the MODE button to view the
current value.
5. Press the TIRE button to increase the
value.
6. Press the MODE button to decrease the
value.
7. Press the SET button to save when the
desired value is reached.
Repeat programming steps 2-7 until Low-Pressure
warning levels are set for all axles as desired.
8. Press the SET button to exit.
9. Press the SET button again to revert to
normal view.
18 PSI = 1.25 Bar

BENDIX SmarTire Specifications

General

Brand	BENDIX
Model	SmarTire
Category	Measuring Instruments
Language	English