BENDIX SmarTire

15
PRESSURE DEVIATION ALERT
Factory default 5 PSI = .35 Bar
This function sets the pressure deviation alert
threshold for all tires.
Programming Steps
1. Enter Level 1 Programming Mode (see page 12)
2. To enter this function press the MODE
button until the +- icon and pressure
units are displayed.
3. Press the TIRE button to enter and display
the current value.
4. Press the TIRE button to increase the value.
5. Press the MODE button to decrease the
value.
6. Press the MODE button until the display
shows OFF to disable this feature.
7. Press the SET button to save when the
desired value is reached.
8. Press the SET button again to revert to
normal view.
5 PSI = .35 Bar