BENDIX SmarTire User Manual

17
HIGH TEMPERATURE ALERT
Factory default 176˚ F=80˚ C
This function changes the high-temperature alert
threshold.
Programming Steps
1. Enter Level 1 Programming Mode (see page 12)
2. To enter, press the MODE button until
the alert icon and temperature unit are
displayed.
3. Press the TIRE button to enter and display
the current value of High Temperature
Alert.
4. Press the TIRE button to increase the value.
5. Press the MODE button to decrease the
value.
6. To disable this feature press the MODE
button until the display reads OFF.
7. Press the SET button to save and exit this
mode when the desired value is reached.
8. Press the SET button again to revert to
normal mode.
176 ˚F = 80 ˚C

BENDIX SmarTire Specifications

General

Brand	BENDIX
Model	SmarTire
Category	Measuring Instruments
Language	English