20
SMARTIRE SYSTEMS INC.
9.
Press SET button to save and exit this mode.
If more than one tire location contain the same
sensor number, the display will prompt an error
with the conflicting tires filled in and the associated
sensor number. Press any button to return the tire
selection menu and make necessary corrections.
10.
Press the SET button again to revert to
normal mode.
11.
If the system has more than four tires, refer to
“Learn” section on page 22.
TABLE 1
Color Tire Number
Green 1
Red 2
Blue 3
Yellow 4
tire rotation –cont’d
ID 1 programmed in two locations
To Next Page
Loading...
