Operation
82
FUNCTION DESCRIPTION
Network
Settings
AMX Device Discovery
Selecting
On the projector can be detected by AMX controller.
Mac Address
Show Mac address.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: User 1, User 2, Projector
Position, Color Space Conversion, High Altitude Mode, Security
Settings, Baud Rate and Network Settings
Current
System
Status
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the PICTURE menu.
Lamp Mode
Shows the current lamp mode.
Resolution
Shows the native resolution of the input signal.
3D Format
Shows the current 3D mode.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent Lamp
Displays the number of hours the lamp has been used.
Firmware Version
Shows firmware version.
5. SYSTEM SETUP: Advanced menu
6. INFORMATION menu
To Next Page
Loading...
