BenQ PH460 - Digital Input Connections (DVI, HDMI, DP)

Connection20
Connecting the digital input
1. Connect the DVI-IN jack on the display to the DVI-D output jack on a computer
using a DVI-D cable. If the computer has a DisplayPort/HDMI output jack, connect
the computer’s DisplayPort/HDMI output jack to the DISPLAY PORT/HDMI-1/
HDMI-2 input jack on the display using a DisplayPort/HDMI cable or a DVI-D to
HDMI conversion cable.
2. If needed, connect the computer’s audio output jack to the AUDIO IN (AUDIO1)
jack on the display using a suitable audio cable.
3. To view video image from this input, press the DVI or DP/HDMI-1/HDMI-2 button
on the remote control. To select an appropriate audio source, see Audio Source
on page 32 for details.
The cables are not supplied and should be purchased separately.
DVI-OUT
DVI-IN
HDMI-2
HDMI-1
VGA OUT
VGA IN
Audio cable
Computer
DVI-D cable
HDMI
cable
DisplayPort
cable