BenQ RM6502S - Parts of the Display and Their Functions; Front;Rear Panel

Parts of the display and their functions 13
Parts of the display and their functions
Front/Rear panel
7 8
No. Name Description
Power Switch
Used to isolate the power supply from the system.
• When the switch is set to ON (I), the system will
automatically enter standby mode.
• When the switch is set to OFF (O), this will completely cut
off the power supply.
Power-in Connects with the supplied power cord.
HDMI Receives HDMI signals from an external device.
TOUCH
External computer touch signal input. When connecting
external computer, besides connecting external computer
VGA and audio signals, external computer's USB port needs
to be connected to the corresponding group. Under the
condition that driver is installed, external computer can be
touch controlled through the equipment (touch function is
effective in VGA and HDMI channel by default).
USB 3.0 Accesses multimedia files on USB drives directly.
USB 3.0 Accesses multimedia files on USB drives directly.
Menu
Press to open or close the sidebar menu.
1
2
3
4
5
6
7