Connection 21
Connecting the digital inputs
1. Connect the HDMI output jack of a computer or A/V device (such as a VCR or DVD
player) to the HDMI input jack on the display using an HDMI cable.
2. To view images from this input, press on the remote control to switch to the
respective input source.
• The applicable cable is not supplied and should be purchased separately.
• The display provides a selection for the dual-monitor mode.
• TOUCH 1 port must be connected with HDMI IN 1 or HDMI IN 2.
HDMI cable
DVD player
Computer
To Next Page
Loading...
