MODIFYING
The Modifying option from the MAIN menu allows the user to disable the
Devices connected to the control panel, and clear the Verify counters and
logger and modify some of the parameters of the Telecom Module.
Select the Modifying option from the
MAIN menu (press 2).
Enter the User Code (the default code is
11111) each digit will be masked by the
symbol Q.
Press the ↵ key to confirm the code. If the
code is valid the display will show the MO-
DIFYING menu.
Select the required option and read the relevant paragraph or press ESC
to step back to the MAIN menu.
Wrong Code If a wrong code is entered, the display will
request Retry as shown opposite.
User default
Code
The User default code is 11111. The User default code may be changed
by means of the PassWD option from the PROGRAMMING menu.
FIRE CLASS 1ØØ
1= Programming
2= Modifying
3= Reading Parameter
Enter
user
code
*****
Modifying:
1=Disable
2=Del.Ver.3=Del. Log
4=Telecom Module
User code
Wrong !
Retry
XXXXX
MODIFYING 21
To Next Page
Loading...
