Logger
The FireClass100 logger can store the last 200 events. When the logger is
full the oldest event will be deleted automatically to make space for a new
event.
A Select the Logger option from the REA-
DING PARAMETER menu (press 4), or
press ESC to step back to the MAIN
menu.
B The display will show the most recent
event.
N.B. The example shows no.123 as the
most recent event.
C
Press the ← to scroll back.
D
Press the → key to scroll forward.
E Press ESC to quit and step back to READINGS menu.
When the ← key is pressed on the oldest
event ...
... the most recent event will be shown.
When the → key is pressed on the most recent event, the control panel will
emit an error signal.
READINGS:
1=Dev./Zones/Outputs
2=Opt.3=Ver. 4=Log.
5=Print 6=M.Telecom
ZONE ALARM 123
FIRE CLASS 1ØØ
Software Zone
15:Ø9 13/Ø7/99 Ø1
ALARM 122
FIRE CLASS 1ØØ
Device: MODULE
15:Ø9 13/Ø7/99 1M13
ZONE ALARM 123
FIRE CLASS 1ØØ
Software Zone
15:Ø9 13/Ø7/99 Ø1
FAULT ØØØ
FIRE CLASS 1ØØ
Missing MAIN
18:Ø2 Ø5/Ø7/99
ZONE ALARM 123
FIRE CLASS 1ØØ
Software Zone
15:Ø9 13/Ø7/99 Ø1
READING PARAMETER 29
To Next Page
Loading...
