Bentel Security FireClass 100 - Telecom Module Settings; Telephone Number Management; Message Management; Remote Management

Telecom Module
Select the Telecom Module option from
the Modifying menu (press 4) to change
the telephone numbers and messages,
and also to enable /disable the Remote
management option. The display will
show ...
Select Numbers (press 1) to change the
programmed telephone numbers.
Select the identifier number (1 to 32) of the
telephone number to be changed, and
change as necessary.
Select Messages (press 2) to change, re-
cord or listen to the messages.
Enter the identifier number of the message
and press 1 to listen. The display will show
...
Press ESC to stop the message and step
back. Select Record (press 6) to record or
change messages.
Select Remote Management (press 3) to
enable / disable Teleservice (ON/OFF).
Modifying:
1=Disable
2=Del. Ver.3=Del.Log
4=Telecom Module
Mod: Telecom Module
1=Telephone Numbers
2=Messages
3=Remote Management
Mod: Telecom Module
Telephone Numbers
Number = 01
____________________
Mod: Telecom Module
Message =
A = Listen
B = Record
Mod: Telecom Module
Listen
Message = 1
>>>>>>> Esc=End
Mod: Telecom Module
Recording
Message = 1
>>>>>>> Esc=End
Mod: Telecom Module
Remote Managem. =OFF
26 Analogue Fire Control Panel FireClass100