... the display will be as opposite.
Press ESC to step back to the PRINT menu (step B).
Telecom Module
Select the Telecom Module option from
the PARAMETER READING menu to
view the Telecom Module settings.
Select Tel.Mod. from the PARAMETER READING menu (press 6), or
press ESC to stepback to the Main menu.
The display will show ...
Select Telephone numbers (press 1) to view the programmed Telephone
numbers (01 to 32).
The display will show ...
Select Messages (press 2) to listen to the
messages recorded during the program-
ming phase of the Telecom Module.
Select Remote management (press 3) to enable or disable (ON / OFF) Te-
leservice.
The display will show ...
Programming Data
Print
Future Use
Future Use
READINGS:
1=Dev./Zones/Outputs
2=Opt.3=Ver. 4=Log.
5=Print 6=M.Telecom
Rd :Telecom Module
1=Telephone Numbers
2=Messages
3=Remote Management
Rd :Telecom Module
Telephone Numbers
Number : 01
____________________
Rd :Telecom Module
Message = 1
A = Listen
Rd :Telecom Module
Remote Managem.= OFF
To Previous Page
Loading...
