Buzzer
The control panel has an incorporated buzzer which signals the panel sta-
tus.
3 sec. sound
1 sec. pause
Signals PREALARM status.
1 sec. sound
0.5 sec. pause
Signals FIXED Delay running.
1 sec. sound
2 sec. pause
Signals - the PAS delay running.
0.2 sec. sound
0.2 sec. pause
Signals - the control panel is in ALARM status.
05 sec. sound
0.5 sec. pause
Signals - FAULT.
1 sec. sound
9 sec. pause
Signals - FAULT stored in memory.
0.3 sec. sound
0.3 sec.pause
Signals - RESET in course.
2 sec. sound
1 sec. pause
Signals - a Zone is in TEST status.
+
Use the TEST key to test the buzzer.
+
The SILENCE command will also silence the buzzer.
8 Analogue Fire Control Panel FireClass100
To Next Page
Loading...
