Power-on message
TAB3
The 8-character power-on message which is displayed during the self-test is program-
med in this function.
Cursor positioning with the SHIFT key.
Character selection with the keys INC and DEC.
The set characters are stored automatically.
SUB DISP
Range:
Display characters
Default: BERGES
Function L: Display brightness
TAB3
Adjustment of the display brightness. Display in %.
This function is available only on inverters with ACTIV display (LED display).
SUB DISP
Range: 14...100%
Default: 42%
Save parameter
TAB3
By pressing both INC and DEC simultaneously the parameter values are stored in the
internal non-volatile inverter memory. At the end of the Save-function the program re-
turns to TAB3, function 1.
BERGES
L 42%
SAVE ??
BERGES electronic
50 Operating manual ACM D2/S2 09.07.2001
To Next Page
Loading...
