Berges ACP micro 3000 - Technical Data; Model Identification Number; Power Specifications

Berges electronic • D–51709 Marienheide-Rodt • Tel. 02264/17-0 • Fax 02264/17126
Operating manual 21.12.98
ACP 3000 — 0.37–15.0 04_GB
6
2 Technical Data
2.1 Model Identification Number
All ACP 3000 models bear a systematic identification number designating the rated input
voltage, the rated power and the housing type. This model number appears both on the
shipping carton label and the technical data label on the drive.
2.2 Power Specifications
Models with Supply Voltage 1 × 230 VAC
Models with Supply Voltage 3 × 400 VAC
* = Maximum inverter capacity. Value = 1.1 × 03-IRAT (see page 35).
Example type marking
Model ACP 3300-3 3300-5 3300-7 3301-1 3301-5 3302-2
Kilowatt (kW) 0.37 kW 0.55 kW 0.75 kW 1.1 kW 1.5 kW 2.2 kW
Output Voltage Three Phase 3.5–230 VAC
Rated current 1.94 A 2.6 A 3.4 A 4.8 A 6.4 A 9.0 A
Maximum Output Current * 2.1 A 2.9 A 3.7 A 5.3 A 7.0 A 9.9 A
Input Volts (±10%) 208–230 V~
Maximum Input Current 3.1 A 4.7 A 6.4 A 9.4 A 12.7 A 18.6 A
Table 2.1
Model ACP 3600-7 3601-5 3602-2 3603-0 3604-0 3605-5 3607-5 3611-0 3615-0
Kilowatt (kW) 0.75 kW 1.5 kW 2.2 kW 3.0 kW 4.0 kW 5.5 kW 7.5 kW 11.0 kW 15.0 kW
Output Voltage Three Phase 7.0–460 VAC
Rated current 1.95 A 3.7 A 5.2 A 6.8 A 9.2 A 13.0 A 18.0 A 24.0 A 30.0 A
Maximum Output Current * 2.1 A 4.1 A 5.7 A 7.5 A 10.1 A 14.3 A 19.8 A 26.4 A 33.0 A
Input Volts (±10%) 400–460 V~
Maximum Input Current 2.11 A 4.2 A 6.2 A 8.4 A 11.2 A 16.0 A 22.2 A 31.0 A 37.9 A
Table 2.2
StockCheck.com