Bernard Controls AT LOGIC v2 - Page 17

English
17
4.3.2 Menu
The Menu screen has 2 main sections:
- Diagnostic and Alarms
- Settings
The Menu screen has 2 main sections:
• Diagnostic and Alarms
• Settings is used to check or change
the actuator’s settings: valve tag,
password, torque limits, Bluetooth
®
,
etc.
The Factory data submenu contains
the actuator’s characteristics (see
Appendix IV).
How to use the knobs
Left
knob
Menu navigation
Right
knob
ESC
OK
 (up)

(down)
Edition
 (1 digit left)
➔ (1 digit right)
− (decrease values)
+ (increase values)