Bernard Controls AT LOGIC v2 - Valve Tags

English
29
5.2 Valve tags
The actuator valve TAG name and its location or process can be set
in Settings > Valve Tags.
5.2.1 How to change the valve TAG
1. Enter the menu, then go to Settings > Valve Tags.
The following screen appears.
2. Select the Valve TAG box.
3. Define the Valve TAG with

or  on the right knob.
4. Go to SAVE with

or  on the right knob then validate
with OK on the left knob.
5.2.2 How to change the location or process
1. Enter the menu, then go to Settings > Valve Tags
The following screen appears.
2. Select Location or Process box.
3. Define the Location or Process with

or  on the right
knob.
4. Go to SAVE with

or  on the right knob then validate with
OK on the left knob.