Bernard Controls AT LOGIC v2 User Manual

English
65
Connecting to the actuator
Once the account is confirmed, your smartphone is ready to connect
to the actuators. Connection to the actuators is achieved with
Bluetooth
®
.
1. Start the App and log into your account.
2. Once logged in, the App will start to scan for nearby
actuators.
3. If the desired actuator is found, select it.
If not, retry, or scan the actuator QR code on the sticker, or
enter its serial number.
> or
4. Check that you are connected to the correct actuator (the 2
LEDs in front of the actuator should blink and the Bluetooth
icon on the screen has between +), then enter the Access
code.
>

Bernard Controls AT LOGIC v2 Specifications

General

Brand	Bernard Controls
Model	AT LOGIC v2
Category	Ranges
Language	English