Bernard Controls AT LOGIC v2 User Manual

English
69
Warnings
Warning
Description
Overtravel
The position overshot by >5% after
the motor cut off
Activity memory fault
There is a fault in the stored
activity data
Excessive number of starts
The start-up rate exceeds the
average for this actuator class
Auxiliary power supply fault for
external circuits
The auxiliary power is not
working. The main board has been
damaged
Local Button fault
The buttons are not working
Selector Off activated
The selector button is in the OFF
position
Selector Local activated
The selector button is in the Local
position
Position fault (<-10% and >110%)
The position is outside the range
Auxiliary command 2 internal error
Auxiliary command 2 is in fault.
The main board has been
damaged.
Actuator hunting action detected
Actuator hunting action detected
Handwheel action
The handwheel has been used
since the last motorized
movement

Bernard Controls AT LOGIC v2 Specifications

General

Brand	Bernard Controls
Model	AT LOGIC v2
Category	Ranges
Language	English