Bernina 700D - Specialty Stitches

MASTERING YOUR BERNINA
®
1/04/02 700D/800DL/61
BERNINA
®
700D/800DL
MASTERING
YOUR
BERNINA
®
Installing the Upper Looper Converter (optional for the 700D)
Owner’s manual pg__
• Turn the handwheel to bring the upper looper to its lowest position before attaching the 2-thread Adapter
• Used for specialty stitches: 3-Thread Super Stretch Stitch, 2-Thread Wrapped Stitch, 2-Thread Flatlock,
2-Thread Rolled Edge
Specialty Stitches
• 3-Thread Super Stretch Stitch
- Ideal for active wear construction; use with Elasticator when applying elastic
• 2-Thread Flatlock
- Wide decorative stitch for home decor projects and active wear
• 2-Thread Rolled Hem
- Delicate decorative edge on fine fabrics
• 2-Thread Wrapped Edge
- Perfect decorative edge finish for blankets and polar fleece edges
Optional Presser Feet and Accessories
• Attachment Base
- For adding 2500 and 1100 attachments: Gathering Attachment, Right Seam Guide, Multi-Purpose
Foot with Guide
• Right Seam Guide
- Accurate seaming
- Attach the Right Seam Guide when working with standard patterns requiring a
5
/8” seam allowances.
- Adjust the Guide from the left needle using a 6” ruler/gauge to measure.
• Multi-Purpose Foot with Guide
- Instructional Leaflet for Multi-Purpose Foot
- Used for: Making covered corded piping, attaching beads, attaching sequins
- Cording Guide – Instructional Leaflet for Multi-Purpose Foot with Guide
Correctly feeds cording under the foot
Use with a variety of stitches
- Covering cord
4-thread overlock stitch, 3-thread wide overlock stitch
- Attaching beads
3-thread flatlock stitch – right or left needle, 2-thread flatlock – right or left needle
- Attaching sequins
3-thread overlock stitch – left needle, 3-thread flatlock – left needle, 3-thread flatlock – left needle
- Use with the Gathering Attachment
Gather fabric and attach covered cord in one operation
SECTION D
Let’s Experiment