EasyManua.ls Logo

Bernina 700D - THREE THREAD SUPER STRETCH STITCH

Bernina 700D
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MASTERING YOUR BERNINA
®
1/04/02 700D/800DL/62
BERNINA
®
700D/800DL
MASTERING
YOUR
BERNINA
®
Fabric: Cotton or nylon Lycra, 5” x 6”
Needle: 80/12 Stretch or 11/75 Ballpoint
Thread: 2 cones of serger thread
1 cone of Woolly Nylon
Presser Foot: Standard
THREE THREAD SUPER STRETCH STITCH
• Owner’s manual pg.___
• Attach the 2-thread adapter to the upper looper. Note: This is an optional accessory for the 700D.
• Set all thread tension levers between 3-5 (normal).
• Following the instructions in the Owner’s manual thread the serger for a Super Stretch Stitch using
Woolly Nylon in the lower looper.
• Adjust the stitch length to 2.5mm (normal).
• Fold the Lycra in half to 2½” x 6”.
• Place the fabric under the foot and serge, cutting off the fold.
• Trim and mount the sample

Other manuals for Bernina 700D

Related product manuals