LB 124 Scint 2. System Description
9
2.2 Operating and Display Elements
Measurement, operation and display are controlled by the soft-
ware integrated in the LB 124 Scint. Measured values, menus
and user information are displayed on a monochrome LCD
graphics module (192 x 64 pixel) with LED backlighting and a
scratch resistant Plexiglas screen. The operation takes place
with the help of the six function keys below the screen. Alerts
and status signals are output via 2 LED’s and a buzzer.
2.2.1 Design of the Display
Measurement menu For more detailed information, please refer to chapter 4.2
Top line (black shading):
Shows status information and the profile name (user).
Center field:
Net measured value(s) with unit of measurement and measured
nuclide(s) or the net value (= cps measurement). In case of si-
multaneous α-/βγ-measurement, both measurement values will
be displayed. Below these values, you find information on the
measurement which can be selected via the softkey function In-
fo/Mod: e.g. the gross values or the representation in the form
of a scale from 0-100% in proportion to the alarm threshold of
the selected nuclide.
Figure 3: Display and function keys
Measuring mode
Measuring value (βγ-ch.)
100% scale
or Alpha display
Softkeys (menus)
Function keys
To Next Page
Loading...
