BERTHOLD TECHNOLOGIES LB 124 Scint Series

To Next Page

To Previous Page

LB 124 Scint 6. Software Functions

6.8.7 Ticks

Here you can set the measurement channel (type of radiation)

in which the acoustic ticks should be audible.

Figure 45: Selection of measurement channel for acoustic alarm

6.8.8 Light

Here you can choose the light intensity for the display: light,

middle and dark can be selected. If no key is pushed for 60

seconds, the display illumination is turned off automatically.

Figure 46: Setting the brightness of the display

BERTHOLD TECHNOLOGIES LB 124 Scint Series - Ticks; Light