LB 124 Scint 6. Software Functions
71
6.9.2 Editing Profiles
Profiles can be modified only by a user having the appropriate
PIN number. The access rights (read/edit/no authorization) can
be defined for each individual menu item.
When setting the profiles the following symbols are used:
R = authorization to read
W = authorization to edit
,_, = no authorization
X = cannot be modified
Editing Profiles
Select the Profile menu.
Figure 51: Profiles menu
Select the profile you want to edit.
Then choose Edit Profile and enter the requested PIN
number after the following prompt:
Figure 52: Edit Profile menu
Select Modify Profile on the Edit Profile menu. The sys-
tem then switches to the editing mode and goes to the Sys-
tem menu (see Figure 38). The profile you want to define
an authorization for is displayed in the top line, along with
the name of the menu you are in. The softkeys are dis-
played in the bottom line. On the Edit Profile menu the
modifying mode is marked by an „X“ in front of every line,
as in this menu no rights can be defined. In all other menus
the defined authorization status (W/R/‚_,) is displayed in
front of every menu item. You can move as usual inside the
menus.
To Next Page
Loading...
