LB 124 Scint 4. Software Design and Operation
19
4. Software Design and Operation
4.1 Software Structure
System menu The software of the LB 124 Scint has a menu-based user inter-
face. All functions (parameter definition, measurement etc.) are
selected from the System Menu (see Figure 6).
Figure 6: System menu
Menu or option names with several periods (…) at the end indi-
cate that there is another display linked to it.
Menu items with an additional setting (e.g. Measurement
Mode) allow the setting to be modified directly: move the cursor
to the respective menu item and press the
key. Then the
setting can be modified with the
key.
Options without periods are commands that are immediately
executed when selected (e.g. Measurement on the System
Menu.
To select a menu or an option, move the cursor to the respec-
tive menu item and press the
key.
Measurement menu You get to the Measurement Menu
a) directly after turning on the device or
b) by selecting Measurement on the System Menu.
c) by pressing
on the System Menu.
Figure 7: Measurement menu (structure of display see ch. 4.2)
To Next Page
Loading...
