Bertin Technologies PRECELLYS 24 User Manual

Alarms
Precellys
®
24
Page 26/35
7.2.4 Engine Temperature Alarm
If the engine temperature reaches the safety limit before overheating the instrument, the engine
temperature alarm sets off and the run stops immediately. The following message is displayed on the
screen:
OVER TEMP WAIT !
PUSH VALID
Red light is flashing / green light is off
To return to the main menu, the user must press the “Valid” button.
Actions to be done in case of alarm are described in § 7.3.
7.2.5 Power Supply Alarm
If a synchronization error with the power supply occurs, the power supply alarm sets off and the run
stops immediately. The following message is displayed on the screen:
ERR POWER SUPPLY
PUSH VALID
Red light is flashing / green light is off
To return to the main menu, the user must press the “Valid” button.
Actions to be done in case of alarm are described in § 7.3.

Bertin Technologies PRECELLYS 24 Specifications

General

Brand	Bertin Technologies
Model	PRECELLYS 24
Category	Laboratory Equipment
Language	English