Better Packages 555e - Motor Chain Adjustment

30
Rev 9 2022
Maintenance & Repair Motor Chain Adjustment
Tools Needed
• 3/8” Wrench
• Philips head screwdriver
Procedure
1. Unplug Machine
2. Remove the water bole, and tank assembly
3. Remove right side cover (5 Philips screws)
4. Loosen the 2 3/8” nuts holding the motor to the
bracket (do not remove the nuts completely)
(Figure 1)
5. Slide the motor toward the back of the machine
unl there is no more slack in the chain (Figure 2)
6. Tighten the 2 3/8” nuts locking the motor in place
7. Replace the right cover (5 Philips screws)
8. Replace water tank, brushes, and water bole
Figure 1
Figure 2