BC615 Installation and User Manual 29
Program time schedules
This function is used to program the time schedules to be used in the
installation.
1 Take out the completed time schedule chart/s.
2 Set the card reader to programming mode.
3 Press A32. z
4 Enter the number of the time schedule to be programmed. Use two
digits, e.g. 01 for time schedule 1.
5 Enter the time zones to be included in the time schedule. Example:
To include time zones 1, 2 and 4, enter 010204.
6 Press B and go to step 4 to program another time schedule or press
B twice to go back to programming mode.
Erase a time schedule
1 Set the card reader to programming mode.
2 Press A32. z
3 Enter the number of the time schedule to be erased.
4 Press A.
To Next Page
Loading...
