36 BC615 Installation and User Manual
Program holidays
This function is used to pre-program holidays that do not occur on
Sundays and holiday periods.
1 Set the card reader to programming mode.
2 Press A51. zz
3 Enter the number of the holiday using two digits (01-15).
4 Enter the date of the holiday, e.g. 1224 for the 24
th
of December.
To program a holiday period, enter the starting date of the period,
e.g. 0701 for the 1
st
of July.
5 If an isolated holiday is being programmed, enter 01.
If a holiday period is being programmed, enter the duration in days
of the period, including the starting date. Max number days 21.
6 Enter the day type to apply for this holiday/holiday period, e.g. 7
for Sunday.
7 Follow steps 3-6 to enter a new holiday/holiday period or press B
to go back to programming mode.
Delete individual holidays
This function is used to delete individual holidays, as distinct to
deleting all programmed holidays (see the next section).
1 Set the card reader to programming mode.
2 Press A52. zz
3 Enter the number of the holiday, e.g. 01.
4 Press B to go back to programming mode.
To Next Page
Loading...
