BC615 Installation and User Manual 55
Duress
This is how to activate the duress alarm output if forced to open the
door under threat (this works during the Card + PIN security level
only):
Swipe or present the card at the card reader and enter the usual PIN
code, only add 1 to the last digit in the code.
Example 1: If the PIN code is 1234, press 1235 instead.
Example 2: If the PIN code is 1239, press 1230 instead.
When a duress code is entered, the door is opened at the same time as
the alarm output is activated (an alarm is sent to a security guard or
similar). The alarm output will be activated until it is reset by entering
programming mode.
To Next Page
Loading...
