32 BC615 Installation and User Manual
Log on a card (with a card)
Using this function, the cards to be used are programmed.
1 Set the card reader to programming mode.
2 Press A01. zz
3 Enter the time schedule during which the card/s should be valid.
Use 2 digits, e.g. 01 for time schedule 1.
4 Swipe the card (BC615) – or present the card (BC615-Prox).
5 If several cards should be valid during the same time schedule,
swipe or present these cards as well.
6 When finished, press B to go back to programming mode.
7 Press B one more time to leave programming mode.
To Next Page
Loading...
