BC615 Installation and User Manual 33
Log on a card (without the card)
Using this function, cards can be programmed by keying in the card
number.
1 Set the card reader to programming mode.
2 Press A03. zz
3 Enter the time schedule during which the card/s should be valid.
Use 2 digits, e.g. 01 for time schedule 1.
4 Enter the card number on the keypad.
5 If several cards should be valid during the chosen time schedule,
key in these cards as well.
6 When finished, press B to go back to programming mode.
7 Press B one more time to leave programming mode.
To Next Page
Loading...
