34 BC615 Installation and User Manual
Log on a series of cards
Using this function you can quickly log on a contiguous series of cards.
1 Set the card reader to programming mode.
2 Press A04. zz
3 Enter the time schedule during which the cards should be valid.
Use 2 digits, e.g. 01 for time schedule 1.
4 Enter the card number of the first card in the series.
5 Enter the card number of the last card in the series. The red LED
flashes as the cards are logged on.
6 Press B to leave programming mode.
Cancel card (with card)
Using this function a card can be cancelled (with the card) so that it
cannot be used in the card reader.
1 Set the card reader to programming mode.
2 Press A14. z
3 Swipe the card (BC615) – or present the card (BC615-Prox).
4 Swipe or present the next card, as required.
5 When finished, press B to go back to programming mode.
6 Press B one more time to leave programming mode.
To Next Page
Loading...
