BC615 Installation and User Manual 35
Cancel card (without card)
Using this function, cards can be cancelled using the card number.
1 Set the card reader to programming mode.
2 Press A16. z
3 Enter the card number. If the card is not logged on the ”faulty
programming” signal is heard
4 Cancel the next card, as required.
5 When finished, press B to go back to programming mode.
6 Press B one more time to leave programming mode.
Program/change/erase common code
This is how to program a common code.
1 Set the card reader to programming mode.
2 Press A21. zz
3 Enter to which time schedule the code should belong/belongs. Use
2 digits, e.g. 01 for time schedule 1.
4 Enter a four-digit common code. The existing code, if any, will be
over-written.
To erase the common code so that it does not work, enter 0000.
5 To programme, change or erase another common code, follow
steps 3-4.
6 Press B to leave programming mode.
To Next Page
Loading...