Bewator BM3 - Changing the Calling Time; Extending the Calling Time 10 Times

BM3 Installation & User Manual 19
ENG
Press 1 to extend opening time 10 times.
Press B to leave programming mode.
To deactivate the function, press 0 in step 3
instead.
Changing the calling time
When Bewacom is delivered the calling time is
set to 30 seconds.
Set Bewacom to programming mode.
Press A29.
Select the desired calling time in seconds
(01-99).
Press B to exit programming.
Extending the calling time 10 times
Using this function the calling time can be in-
creased by a factor of ten.
Set Bewacom to programming mode.
Press A61.
Press 1 to extend the calling time 10 times.
Press B to leave programming mode.
To deactivate the function, press 0 in step 3
instead.
3�
4�
1�
2�
3�
4�
1�
2�
3�
4�