BM3 Installation & User Manual 21
ENG
Background lighting
This function allows you to turn off the keypad
background lighting of the Bewacom. The de-
fault setting is on.
Set Bewacom to programming mode.
Press A60.
Press 0 to shut off background lighting.
Press B to leave programming mode.
To turn it on again, press 1 in step 3 instead.
Internal sounder
When Bewacom is delivered the internal sound-
er is on. If the sounder is not required to sound
on keypresses and door release, you can turn it
off. Note that the sounder will still be sounding
during programming.
Set Bewacom to programming mode.
Press A65.
Press 0 to shut off the sounder.
Press B to leave programming mode.
To reactivate the sounder, press 1 in step 3
instead.
1�
2�
3�
4�
1�
2�
3�
4�
To Next Page
Loading...
